Materials
Solid 18K Gold Parts
Introducing the epitome of luxury craftsmanship: Each Crown, Bezel and middle Link of our Rolex Replica 2-Tone models is forged from pure 18k gold, exuding a radiant allure that catches every glimmer of light. Solid Gold parts offer exquisite aesthetics, durability and longevity to our watches.
Whether worn as a statement piece or a daily accessory, the Solid 18k Gold Parts on SolidSwiss1.sr Swiss Replica Super Clone Rolex 2-Tone watches embodies the essence of refinement and prestige, setting new standards for excellence in horology.
Solid 904L Steel
Solidswiss.cd uses a 250 ton press to cut the 904L steel case. 904L is usually used in the chemical industry, where maximum resistance against corrosion is essential. A super alloy, that marries perfectly with other Solidswiss.cd precious metals. It’s extremely corrosion resistant and highly polishable.
Although other watch manufacturers use 316L quality stainless steel, Solidswiss.cd sets itself apart by using a harder, more chemical resistant steel that is yet another quality that sets Solidswiss.cd into a unique category of Swiss made Rolex replica watches.
Non magnetic – Corrosion Resistant
Solidswiss.cd 904L grade steel is non-magnetic in all conditions and has excellent weldability and formability. Although originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments. Salt and other minerals proved to be catalysts for corrosion and deterioration around the threads that hold the caseback.
To prevent premature deterioration, Solidswiss.cd uses 904L, a stainless steel with slightly higher nickel and chromium content. 904L is also resistant to chloride, a potential cause for pitting and corrosion.
Solidswiss.cd Precious Metals
Solidswiss.cd is the only Rolex Swiss made replica watch manufacturer the uses real 18ct white-yellow-rose gold and real platinum alloy (95% platinum 5% palladium) with a unique plating technique PVD that makes our timepieces so unique.
The Swiss craftsmanship, our new Rolex Clone Swiss made movements and the precious metals we use, results to an undetectable Rolex replica that will last you a lifetime. That is why Solidswiss.cd Rolex Swiss made replica watches are more expensive compared to Asia cheap fake replica watches that only lasts a few months.
Solid Sapphire crystal
Solidswiss.cd Rolex Swiss made replica watches are equipped with high purity Swiss made scratch-proof Sapphire crystal with colorless glareproof coating inside out, same shape, thickness and Cyclops magnification power as the genuine Rolex.
Producing synthetic sapphires - the hardest stone after the diamond - calls upon extremely sophisticated skills and production means, and involves a large number of operations that only Solidswiss.cd masters. Applying the glareproofing on both sides implies highly specialized expertise and equipment.
Blue Super-Luminova
Solidswiss.cd uses Super-Luminova luminous material which operates like a light battery. After sufficient activation by sunlight or artificial light, they glow in the dark for many hours. Light markings guarantee full legibility for the whole night.
This activation and subsequent light emission process can be repeated again and again, and the material does not suffer any ageing. Consequently, Super-Luminova® offers full high-performance over lifetime of a Solidswiss.cd Rolex Swiss replica watch.
Real Moissanite Diamonds
Solidswiss.cd Moissanite diamonds are another feature that adds value to our Swiss Rolex replica watches. With a refractive index of 2.65-2.69, Moissanite exhibits more brilliance than diamond!
And thanks to a dispersion that’s 2.4 times that of diamond, Moissanite bends light into mesmerizing rainbow flashes of fire… over two times more than diamond, ruby, emerald or sapphire. By day and by night, Moissanite simply dances with light.
10 times more Gold with PVD plating
An application of PVD plating that is applied to Solidswiss.cd Swiss replicas is 10 microns, or 10 times the thickness of typical gold plating and many times more durable than the thickness implies. PVD plating with titanium nitride is scratch proof, and it takes effort to scratch through to the base metal.
The titanium nitride is first applied to the 904L steel, which produces a very hard rough surface. When the gold or platinum is applied, it first fills the minute cavities in the rough surface and builds up to form a smooth surface. Since the high points of the titanium nitride are so hard, they protect the precious so they don’t wear away.
Baked at 2050° Celsius
Soildswiss.cd synthetic sapphire is made from alumina (an aluminum oxide). This material is brought to its fusion point at 2050° C, with the addition of oxygen and hydrogen. It takes around 15 hours for the "corundum" (crystalline alumina) to form on the rod somewhat like a stalagmite. The stones are then re-fired at a temperature of 1800° C in order to stabilize the material.
The corundum’s are sawn by thin diamond-polished blades. Machining the crystal continues with grinding the diameter to within 2/100ths of a millimeter, and then surfacing, meaning adjusting the thickness.
Dials, diamonds and bezels
Blue Super-Luminova lumen, Moissanite diamonds and sapphire over bezel pearl are some of the exclusive features of Solidswiss.cd Rolex Swiss replicas. We use only Super-Luminova® pigments that are environmental friendly, non-toxic, and absolutely free of radioactivity. The real Moissanite diamond markers and real sapphires crystals ensures that Solidswiss.cd Rolex Swiss replicas are completely undetectable.
Our ceramic bezels are formed from an extremely hard ceramic material with excellent corrosion-resistant properties. Solidswiss.cd Swiss made bezels come in blue, black or green ceramic that remains unaffected by ultraviolet rays and it is virtually scratchproof.
Scratch Resistant
904L stainless steel is harder and does not machine well than other steels used in watches. Subsequently, Solidswiss.cd had to design its own tools to work with the material and utilizes a 250 ton press to stamp the initial cases.
In addition to higher rust, corrosion, and pitting resistance, 904L polishes quite well with the correct tools and know-how. The brushed finishes of 904L leave a warm grain that is somewhat harder to scratch, although watch strap scratches are almost entirely impossible to avoid even in the genuine Rolex watches.
Sapphire with laser etched Rolex crown
Solidswiss.cd new Rolex Swiss replica watches have a very small, nearly imperceptible laser etched crown at the 6 o’clock position on the crystal. The cambered or domed shape of the crystal is achieved by grinding the lower and upper surfaces. After its angles have been beveled, guaranteeing a neat fit with the case, the sapphire crystal is chemically polished on both sides.
It is then transferred to a sterilized laboratory (white room) where it is placed in a furnace to receive the glareproofing treatment applied by means of a highly elaborate vacuum-evaporation process. This is another feature that makes Solidswiss.cd Rolex Swiss made replicas the best in the word.
100% Swiss made movements
Solidswiss.cd developed a production system that revolutionizes the movement assembly. Precision is measured by a robot and each individually numbered Solidswiss.cd Rolex clone movement is tested during 15 consecutive days and nights. Solidswiss.cd is a Swiss watch cloning specialist that has played a key role in the technical development of the procedure.
It took us 5 years to complete and unveil a high-performance Rolex clone caliber endowed with the architecture of which introduced Rolex into the highly exclusive circle of watch manufacturers and possess their very own mechanical chronograph movement. SolidSwiss.cd Rolex Swiss made replica watches are the only ones in the world tested with the COSC standards certification system.